BagJaw
Parts list: Dustpan, Rods, Vinyl Tube Connector, Cube Tool, Push-On Rings, Vinyl Caps
- Insert the ends of the rods through the raised corner holes of the dustpan.
- Set #4 Cube Tool on a flat surface, raised side down.
- Insert #5 Push-On Ring (crown side down #5a) into the top round hold of the Cube Tool.
- Push one rod end through #5 Ring in Cube Tool until Ring is snug against the underside of the dustpan.
- Repeat with the other rod at the opposite end of the dustpan.
- Cover rod ends with #6 vinyl caps.
